Ways On How To Make Wood Floor Medallions

When it comes to things that can really make your home appealing, applying wood floor medallions is known to be one of the most effective options every homeowner should consider. This is especially true when his home comes with hardwood floors. Wood medallions for the floor not only add beauty but character to the floor as well. If you are interested to this kind of home or floor enhancement option then this article proves to be something great and helpful on your part as we will be discussing about the steps and necessary tools required to make one.

Keep in mind that that this project is considered s something moderately difficult but overall, it can be an exciting and challenging job for everyone. Just follow the steps and honor the rules and you will definitely never go wrong in this kind of home improvement endeavor.

Instructions

  • 1. It is an important consideration to know where you are going to install the wood floor medallion. This will allow you to know the type of wood which you are going to use for the project. If medallions are to be placed outdoors then it is best to use waterproof plywood and glue. For indoor use, a strong plywood and epoxy will do the job. To help you determine the kind of appearance your medallions will have, you should be aware of the grain and color of the wood you will be using.
  • 2. There are actually many different types of tools which are being used in carpentry, however, in making wood medallions, it makes sense to use cutting tools like a jig saw, router, or a hand saw. The kind of cutting tool to be used mainly depends on the preference of the carpenter or builder. Sandpaper and chisel are also important to smooth the edges that have been cut as well as the finished products. Vacuum press and clamps are used for holding wood pieces together. A sealer such as shellac is used to seal the woods before the top coat and the final sealant are applied.
  • 3. Make a plot; this means you have to measure the shape and the size of the medallions which you are going to make. Draw those measurements on the plywood and create a pattern. This will be used to back the medallion, giving additional strength and support to it. Cut cautiously and accurately.
  • 4. Make templates. You can do this by tracing and following the shape and size of the wood floor medallion backing on the poster board. Create a design for the medallion then draw a pattern right on the poster board’s surface. Cut each of the pieces.
  • 5. Once you are done cutting the pattern pieces, you may now lay these templates on each hardwood, gracing around them. Cut the pieces of hardwoods accurately then sand the edges properly until smooth. After finishing the pieces, lay them altogether on the plywood which will serve as the backing. Press the pieces together as tight as possible. This will allow you to know whether or not they fit together effectively.
  • 6. The next step will be the gluing stage. While doing this, you need to make sure that they should come up with a strong and solid wear and tight seams as well. The edges should be glued using a strong type of epoxy. Once you are done with the gluing stage, you may now allow some time for the glue to dry.
  • 6. The next step will be the gluing stage. While doing this, you need to make sure that they should come up with a strong and solid wear and tight seams as well. The edges should be glued using a strong type of epoxy. Once you are done with the gluing stage, you may now allow some time for the glue to dry.
  • 6. The next step will be the gluing stage. While doing this, you need to make sure that they should come up with a strong and solid wear and tight seams as well. The edges should be glued using a strong type of epoxy. Once you are done with the gluing stage, you may now allow some time for the glue to dry.

You can finish wood floor medallions, apply topcoat on them, place them on finished wood floors, or simply place them into your new flooring. Always consider using marine plywood when your project entails outdoor applications. This will ensure you that the plywood can stand moist or water exposure all through the years.